Moonlight streaming
cross-posted from: https://lemmy.zip/post/63608721
> Welcome all.
> I am personally using recalbox on a Raspberry Pi 400, overclocked to 2147/650.
> 1 Gbit network on the Raspberry is connected through cable.
>
> The max I can get moonlight to stream games from the main PC (sunlight) is this:
> 1080p
> 60fps
> 12Mbit (higher than 13 causes stutter since the raspberry pi 400 can not cope anymore)
>
> HOST/SUNSHINE settings for AMD 7900XT:
> FEC percentage=0
> Quantization Parameter=0
> Minimum Thread count=4
> AMF Variance Based Adaptive Quantization (VBAQ)=1
>
> This maxes 1 core on the Raspberry Pi 400 almost out completely during decoding. And since moonlight is a single core operation, there is no more headroom.
>
>
> What is the hardware combination you are all using, and what is the maximum streaming settings that you are able to achieve?
>
> Welcome all.
> I am personally using recalbox on a Raspberry Pi 400, overclocked to 2147/650.
> 1 Gbit network on the Raspberry is connected through cable.
>
> The max I can get moonlight to stream games from the main PC (sunlight) is this:
> 1080p
> 60fps
> 12Mbit (higher than 13 causes stutter since the raspberry pi 400 can not cope anymore)
>
> HOST/SUNSHINE settings for AMD 7900XT:
> FEC percentage=0
> Quantization Parameter=0
> Minimum Thread count=4
> AMF Variance Based Adaptive Quantization (VBAQ)=1
>
> This maxes 1 core on the Raspberry Pi 400 almost out completely during decoding. And since moonlight is a single core operation, there is no more headroom.
>
>
> What is the hardware combination you are all using, and what is the maximum streaming settings that you are able to achieve?
>